|
|
Build Your Online Product Catalogs?
| Product Name: |
combination woodworker,woodworking machinery
|
| Supply Ability: |
10000 units |
| Related proudcts |
|
| Specifications |
ML353 |
| Price Term: |
|
| Port of loading: |
|
| Minimum Order |
|
| Unit Price: |
|
|
As a manufacturer ,A combination woodworker is exactly what is says it is ,a combination of planer /thicknesser ,sawbench,spindle moulder and mortiser ,all in one co***ct and multifuction unit.
The machine tables are all made of cast iron for strength on a steel fabricated base unit.The fences are made of extruded aluminum and are fully adjusted .The machine has dust extraction hoods or outlets on each function each of which has a 100mm outlet adn requires a dust colletor.The machine has a weight of some 235kgs,which achives much stable performance.
The machine has two independent motors ,each one dedicated to one of the above functions and controlled by use of switch console,and a number of switches situated around the machine closed by each working station.
Planer/Thicknesser
The planer has a 250mm wide bed adn can be used to straighten timber and plane it with two saquare edges prior to thicknessing.The cutter block has a speed of 4000 rpm and it is fitted with three re-sharpen -able knives giving a very clean finish.For chamfers the planer fence can be angled over to a maximum of 45 degrees .Whilst surfacing or planning the dust hood sits beneath the machine,collecting the chips (and should be used with a suitable dust collector).To undertake thicknessing the tables are raised and the hood relocated allowing timber up to 250x180mm in size to be accurately dimensioned .The timber is fed by feed rollers at a fixed speed of 8 meters per minute.
Sawbench
The saw will accept a 200mm diameter blade the machine is supplied with a rip blade .There are many different types of applications that should be considered before fitting the blade .These are ripping ,cross-cutting and fine cutting of man made materials such as MDF.
Spindle Moulder
The machine has a 30mm spindle which has a single speed of 7600rpm.Again ,because there are so many different types of cutter block ,the machine is not supplied with a cutter block.Fitted to the machine is a fully adjustable guard,which has an independently adjust |
| Company: |
Laizhou Machinery Group Co.,Ltd
|
| Contact: |
Mr. Weihua Zhao |
| Address: |
The developing zone,laizhou,shandong |
| Postcode: |
261400 |
| Tel: |
86 535 2295211 |
| Fax: |
86 535 2295882 |
| E-mail: |
|
|
|
|
Home
